Instruction manual

IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be followed, including the
following.
Read all instructions before using this sewing machine.
To reduce the risk of electric shock:
DANGER -
1.This sewing machine should never be left unattended when plugged in. Always unplug this sewing
2.Always unplug before replacing light bulb. Replace bulb with same type rated 1 watts.
WARNING -
To reduce the risk of burns, fire, electric shock, or injury to persons:
1.Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or
near children.
2.Use this sewing machine only for its intended use as described in this manual. Use only attachments
recommended by the manufacturer as contained in this manual.
3.Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it
has been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized
retailer or service center for examination, repair, electrical or mechanical adjustment.
machine from the electric outlet immediately after using and before cleaning.
4.Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the
sewing machine and foot control free from the accumulation of lint, dust, and loose cloth.
5.Never drop or insert any object into any opening.
6.Do not use outdoors.
7.Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
8.To disconnect, turn switch to the off position, then remove plug from outlet.
9.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10.Keep fingers away from all moving parts. Special care is required around the sewing machine needle.
11.Never sew with a damaged needle plate as this can cause needle to break.
12.Do not use bent needles.
13.Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14.Switch the sewing machine OFF when making any adjustments in the needle area, such as threading
needle, changing needle, threading bobbin, or changing presser foot, etc.
15.Always unplug sewing machine from the electrical outlet when removing covers, lubricating,
or when making any other user servicing adjustments mentioned in the instruction manual.
CAUTION-
SAVE THESE INSTRUCTIONS
FOOT CONTROL (USA ONLY)
Moving parts - To reduce risk of injury, switch off before servicing.
Close cover before operating machine.
This product is for household use, or equivalent.
ELECTRONIC MODEL
POLARIZED PLUGS CAUTION
Use Matsushita Electric, Model YSD180034 with this sewing machine.
This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet only one way. If the plug dose not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
Do not modify the plug in any way.