Instruction manual

-19-
STRAIGHT STITCH SEWING
Straight stitch patterns should be selected according to the type of fabric being sewn.
1
2
START
STOP
1.Position the fabric under the presser foot and lower it.
Hold the upper thread and bobbin thread loosely
behind the presser foot.
2.Lower the presser foot lever and press START/STOP
button to start sewing.
(When foot control is used, press the pedal.)
3.When you reach the end of seam, press the reverse
button to sew 3-4 stitches.
Place hand lightly on the fabric while sewing
to guide the fabric.
01
1
2
Select the straight stitch pattern 01 or 02
Attach all purpose foot.
Adjust the stitch length and stitch width (see page
10) according to the type of fabric being sewn.
4
START
STOP
4
3
3
4.Release the reverse button and stop sewing by
pressing the START/STOP button (or releasing
the pressure on foot control.)
5.Touch the REINFORCEMENT button to sew 4 tie-off
stitches.
5
6
Tie-off
6.Raise the presser foot and cut thread.
01
02