Instruction manual

-21-
OVERCASTING-OVERLOCKING
203718 06 15
A
C
B
D
E
USING THE OVERCASTING FOOT
CAUTION:To prevent accidents.
Overcasting foot should be used for sewing
patterns 06 ,18,19,and 37 only and do not change
the stitch width narrower than 5.0 It is possible
that needle could hit the presser foot and break
when sewing other patterns and width.
USING THE GENERAL PURPOSE FOOT
15
Position the fabric against the guide plate of the
overcasting foot so that the needle falls near
the edge of the fabric.
A. Overcasting stitches (width 6.5-5.0) are used
for preventing raveling of fabrics.
B. Some stitches can sew the seam and
overcasting at the same time.
Therefore, it is convenient for sewing easy
to ravel and stretch fabrics.
When using the all-purpose foot, place the
fabric so that the needle will fall near the edge
of fabric.
C. For thin or fine fabrics, use a narrower
zigzag width or 3 step zigzag stitch.
E. For1/2 inch seam allowances, sew then trim
the excess fabric close to the stitching Be
careful not to cut thread when cutting the
fabric edge.
19
D. Adjust the width and length for various
weights of knit and stretch fabrics.(When
using overcasting foot, do not change the
width narrower than 5.0mm.)
19 06 37 15 2018