Instruction manual

-22-
BLIND HEM STITCHING
This stitch will sew without stitches showing on right side of fabric.
5mm
1cm
5mm
A
B
Right Side
Wrong Side
2
1
4
3
5
Wrong Side
Wrong Side
Overcasting
21
(3/16 ) (3/16 )
1.Fold the fabric as shown on drawing.
Leave 5mm (approximately 3/16 inch)
extended past the folded edge.
2.The guide (A) on the blind hem foot ensures
even feeding of the fabric when blind
hem stitching. The guide (A) is adjusted
by turning the adjusting screw (B).
3.Place fabric so that the straight stitches
are on the extended hem edge and the
zigzag stitches just catch one thread of
the folded edge. Turn the screw so that
the guide barely touches the folded edge
of fabric.
4.Lower the presser foot and sew hem,
guiding fabric evenly along the guide.
5.Turn the fabric over when you have
completed sewing.
21
21 22