Instruction manual

Stitch Length (L) - Stitch Width (W) - LED light conversion chart in millimeters (mm)





-35-
Decorative
Stitch
No.
Cross stitch
Stitch name
L
(mm)
W
(mm)
1
1
L
(mm)
W
(mm)
L
(mm)
W
(mm)
L
(mm)
W
(mm)
L
(mm)
W
(mm)
L
(mm)
W
(mm)
L
(mm)
W
(mm)
L
(mm)
W
(mm)
L
(mm)
W
(mm)
L
(mm)
W
(mm)
2 2 3 3 4 4 5
57
58
59
60
61
62
63
64
65
66
Decorative
Cross stitch
Decorative
Cross stitch
Decorative
Cross stitch
Decorative
Satin stitch
Decorative
Satin stitch
Decorative
Satin stitch
Decorative
Satin stitch
Decorative
Satin stitch
Decorative
Satin stitch
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
2.5
0.6
_
_
_
_
0.6
0.6
0.6
2.5
2.5
2.5
0.6
0.6
0.6
0.6
0.6
0.6
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
2.5
2.5
_ _
_ _
_ _
_ _
5.0
2.0
5.0
2.0
5.0
2.0
5.0
2.0
_ _
_ _
_ _
_ _
7.0
4.5
7.0
4.5
7.0
4.5
7.0
4.5
7.0
7.0
7.0
7.0
4.5
7.0
4.5
7.0
4.5
3.0
_
_
_
3.0
3.0
_
_
_
2.0
2.0
2.0
5.0
2.0
5.0
2.0
2.0
_
1.0
1.0
1.0
1.0
1.0
1.0
_
_
_
_
_
_
_
_
_
3.0
3.0
3.0
4.5
4.5
4.5
ACTION BEEPS
For each activity in the electronic control part of the machine, there will be a warning to let you know that the electronic panel has received the command.
WARNING
BEEP
WHAT IT MEANS
WHAT TO DO
UP
WARNING
ONE BEEP
Needle is stopped in UP position.
Machine is defective.
Foot control is plugged into machine.
You have pressed the low speed button.
Machine sews reverse stitching
Foot control has been unplugged.
START/STOP button is pressed when foot control is plugged in.
Needle is in DOWN position.
Remove fabric or change stitch when needle is in UP position.
Sew low and release the button to continue sewing normal speed.
Press START/STOP button to run machine.
Unplug foot control to use START/STOP button.
START/STOP button cannot be used when control is plugged into machine.
Continue sewing reverse or release.
Pivot the fabric for continued stitching or raise the needle to remove the fabric.
ONE BEEP
ONE BEEP
ONE BEEP
ONE BEEP
ONE BEEP
ONE BEEP
THREE BEEP
DOWN
LOW SPEED
BACK
START ENABLED
START DISABLE
START DISABLE
-Reposition buttonhole foot to continue.
-Wait a few seconds or turn machine off and back on to reset the
program.
-If machine still beeps, contact your authorized retailer or service
center.