Extra Information

STITCH SETTINGS SCREEN
14
Before creating the embroidery pattern, specify the stitch settings. Lines of the design are sewn with
various stitches and areas are sewn with fill stitches or stippling stitches. Stitching of the areas were
already selected in “Drawing Regions” on page 10, so specify values of detailed settings.
After specifying the settings, press to create the embroidery pattern.
If the design data is saved, the settings can be changed after a trial embroidering.
Specifying individual stitch
settings
Select a pattern in the stitch settings screen to
specify its line and region stitch settings. If multiple
patterns are selected, the settings are applied to
those patterns.
■ Line settings
a Shows the stitch type and color for the selected
line.
b Shows the stitch settings for the selected line.
Line sew stitch settings
Select the type of stitching you want applied to your
line art, from zigzag stitch ( ), running stitch
( ), triple stitch ( ), candlewicking stitch
or chain stitch .
Zigzag stitch
Running stitch /Triple stitch
* Both includes an under sewing.
Candlewicking Stitch
Chain stitch
STITCH SETTINGS SCREEN
a
b
Zigzag width
Specifies the width of the zigzag stitches
used to sew the lines of the design.
Density
Specifies the density of the zigzag stitches
used to sew the lines of the design.
Run pitch
Specifies the length of the straight stitch of
the design.
Size
Increases/reduces the size of the pattern.
Spacing
Specifies the spacing of the candlewicking
stitch.
Size
Increases/reduces the size of the pattern.
Repetition
Sets repeated sewing at the same part.