Extra Information

CREATING LINE IMAGE
23
c
Press .
* To import an image from USB media, computer or
SD card, press , , or .
For details, refer to page 21.
* If you scan the image, make sure that the scanning
frame is attached to the machine. Refer to “Using
the Scan Frame” on page 18.
 When the following message appears, press .
 Scanning begins.
* To stop scanning and return to the screen in
step
c, press .
d
When scanning is finished, specify the
“Gray-Scale Detection level” on the screen
if necessary.
The “Gray-Scale Detection level” can change the
black and white threshold for the image.
* If you do not know how the settings should be
changed, first continue the operation without
specifying settings and check the results.
* To stop scanning and return to the screen in
step
c, press . The scanned image will be
deleted when you return to the previous screen.
e
Move to frame the image for the
pattern.
f
Press .
 The screen for confirming the converted image
appears.
Note
• When scanning starts, some of the machine
lights will turn off in certain circumstances,
in order to increase the scan quality. The
machine lights will return to their original
brightness when scanning ends.
• You can import an image of 2 MB or smaller
from USB media, computer or SD card.