Operation Manual

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
25
c
Firmly insert the two spool pins into the two
holes in the spool support.
d
Open the upper cover of the machine, and
then pull the upper cover up to remove it
from the machine.
e
Insert the spool stand onto the notches of
the machine.
■ How to remove
a
Pull the spool stand up to remove it from
the machine.
b
Attach the upper cover to the machine.
Note
• Make sure that the stoppers on the
telescopic thread guide shaft are firmly in
place and that the thread guide openings
are directly above the two holes for spool
pins in the spool support. In addition, check
that the shaft is securely tightened in the
spool support.
Memo
• See page 56 about the bobbin winding
using the spool stand.
• See page 65 about the upper threading
using the spool stand.