Instruction manual
When using synthetic threads that easily spill off the cone,
slip the thread net furnished with the machine over the thread
from the bottom of the cone leaving the thread end hanging free
at the top as shown on the right.
Take out the thread antenna from the top of styrofoam,
and insert it as shown in first illustration.
This machine is shipped with the thread antenna on the
top of styrofoam.
Fully extend the thread antenna.
The two joints on the telescope will click into place
when they are correctly positioned as shown in second
illustration
Center the thread guides above the spool pins.
Place thread over the cone adapters on the spool pins.
Note: Your new machine is threaded to sew Triple Cover
Stitch. Refer to Page for instructions on tying on
to the threads.
28
When using a regular thread spool, fit the spool cap supplied
with the machine onto the thread spool as shown at right.
8. PREPARATION FOR THREADING
Setting Up the Thread Antenna
Thread Net
Spool Cap
Thread
Spool cap
Thread spool
Press in
9