Instruction manual

2
9
3
1
3
6
7
8
5
4
2
1
3
2
23
(1) Threading the
( C on needle clamp)
6) Threading the Cover Stitch Needles
Cover Stitch Left Needle (red)
Thread the cover stitch left /chain stitch needle as indicated in
steps 1 through 9.
- Raise presser foot to release tension discs.
While holding thread with finger, pass it between the tension
discs and pull thread down to make certain it is properly
located in between the tension discs.
3
Thread the top cover
thread guide by pulling
the thread towards the
left until it slips under
guide. Then pull thread
along the right side of
pretension disc as
illustrated.
Pass thread from back to the front through thread guide.
1
2