Instruction manual

29
(3/8")
9.8 mm
ne dlee
7.8 mm
Chain stitch
(5/16")
Left ne dlee
(13/64")
7mm
(17/64")
5mm
Right ne dlee
3mm
(1/8")
5mm
(3/16")
needle
8.8 mm
Chain stitch
(11/32")(10/64")
(15/64")
Left ne dlee
Right ne dlee
6.0 mm
4.0 mm
Overlock seam width can be adjusted from narrow (using right
needle) to wide (using left needle) and also with the width
adjustment dial.
Overedge seam width can be adjusted from narrow (using right
needle) to wide (using left needle).
a) When using left needle.................................6 mm (15/64 inch)
b) When only right needle is used....................4 mm (10/64 inch)
c) When using chain stitch needle.................8.8 mm (11/32 inch)
Use of width adjustment dial will permit further adjustment within
the width range shown below.
a) When using left needle..........5 ~ 7mm (13/64 ~ 17/64 inch)
b) When only right needle is used....3.0 ~ 5.0 mm (1/8 ~ 3/16 inch)
c) When using chain stitch needle....7.8 ~ 9.8 mm (5/16 ~ 3/8 inch)
15. HOW TO ADJUST THE SEAM WIDTH
Needle Position Width
As shown on the illustration, turn the dial counter clockwise to
increase width of cutting, and clockwise to decrease width of
cutting.
Width adjusting dial
6.5
N
5.5
N