Instruction manual

This machine is capable of producing various types of stitches according to the combination of Auto Tension
Selected, needle positions, threading methods, and the use of convertible right looper/converter.
Stitch Type Reference
Page
34
39
40
41
42
43
44
45
ATD : Auto Tension Dial Selected
ATD: D
ATD: E
ATD: B
ATD: F
ATD: G
ATD: A
ATD: A
ATD: G
ATD: D
22. SELECTION OF STITCHES & AUTO TENSION
A 1-needle 2-thread straight stitch is used
for construction or decorative stitching.
Seams also can be sewn at desired
distance from edge of fabric by
disengaging the right looper and movable
knife.
1-needle 2-thread stitch is used for
It is also ideal for rolled and blind hemming.
A 4 mm and 6 mm overlock seam width
can be obtained by changing the needle
position.
1-needle 2-thread stitch is used for
overedging common fabrics. It is also
ideal for flatlock (butted or lapped) seams
and blind hemming. A 4 mm and
6 mm overedge seam width can be
obtained by changing the needle position.
overedging and seaming on common
fabrics. A mm and 6 mm overlock seam
width can be obtained by changing the
needle position.
1-needle 3-thread stitch is used for
butted or lapped seams and ornamental
stitching with decorative thread. Also,
a 4 mm and 6 mm flatlock width can
be obtained by changing the needle
position.
2-needle 3-thread stitch that is ideal for
lightweight, extremely stretchy fabrics
such as tricot and spandex.
2-needle 4-thread stitch that is ideal
for medium to heavyweight stretchy
fabrics such as double knits and swim
wear.
1-needle 3-thread stitch is used for
seaming lightweight or stretch fabrics.
Wrapped Edge
Overlock
Overlock
1. Chain Stitch
2. 2-Thread
3. 2-Thread
Overlock
4. 3-Thread
5. 3-Thread
Flatlock
6. 3-Thread Mock
Safety Stitch
Overlock
7. 4-Thread Mock
Safety Stitch
Overlock
Narrow
Wide
Narrow
Wide