Instruction manual

Clean the lint from the looper and knife area often with a dry lint

brush.

Danger: Before cleaning your machine, disconnect power

line plug from the wall receptacle.

The oiling points shown in the diagram, should be oiled periodically.

Note: Use only sewing machine oil. Do not use any other oil or

damage could result.

Danger: Before lubricating your machine, disconnect power

line plug from the wall receptacle.

Cleaning the Machine

Oiling the Machine

28. MACHINE MAINTENANCE

An overlock machine requires more maintenance than a

conventional machine for two reasons:

1) A lot of lint is produced due to the cutting action of the knives.

2) An overlock runs at a very high speed and needs to be oiled

frequently to lubricate the internal working parts.

oil