Instruction manual

Light cover screw

Replace Remove

Light bulb is available at your local retailer. Take old bulb to the

retailer and ask for same bulb.

If voltage indicated on the electrical rating plate of your machine is

120V, ask for light bulb conforming to following specification.

- Bayonet type: 110~120V, 15W

Glass shape: T-20

Lamp cap: E12

Overall length: 48mm

Remove light cover screw then while pushing the cover lightly

to the rear, swing cover to the left and remove from machine

as shown in the illustration. Turn bulb to the left to remove. To

replace the bulb, push bulb into the socket and turn to the right.

If voltage indicated on the electrical rating plate of your machine

is 220-240V, ask for light bulb conforming to following specification.

-Edison type (screw type): 220 ~240V, 15W

Glass shape: T-22

Lamp cap: E14

Overall length: 56mm

Remove light cover screw then while pushing the cover lightly to

the rear, swing cover to the left and remove from machine as

shown in the illustration. Turn bulb to the left to remove. To

replace the bulb, screw bulb into the socket and turn to the right.

Danger: Always unplug before re-lamping.

Caution: Be sure the light bulb has cooled off before

changing with a new one.

Warning: Replace the light cover first before connecting

the power line plug.

How to Change Light Bulb