Instruction manual

ADJUSTMENTS DURING THE EMBROIDERY PROCESS
Embroidery
173
5
Manually Resuming Embroidery
After Turning Off the Power
Example: If the power is turned off while
sewing the second color
a
Select the pattern and press .
b
Press to move the second color to the
first position in the display.
c
Use , , or to advance the
pattern to slightly before where sewing
stopped.
d
Press to return to the original
screen.
e
Press the “Presser Foot Lifter” button to
lower the presser foot and press the “Start/
Stop” button to start sewing.
Note
• To continue a pattern that has had its
position changed (see page 179), move the
pattern the same amount in the layout
display screen, then follow the steps above.
In this case, you need to make a note of the
pattern’s position before turning off the
power.
Memo
Use the display to remember the
last stitch number sewn before you turn off the
power. Then use the , , or
keys to move the pattern to the same stitch
number and continue sewing.