Instruction manual

UPGRADING YOUR MACHINE’S SOFTWARE
Appendix
241
7
Upgrade Procedure Using
Computer
a
While pressing the “Automatic Threading”
button, turn the main power to ON.
→ The following screen will appear on the LCD.
b
Press .
c
Plug the USB cable connector into the
corresponding USB port connectors for the
computer and for the machine.
→ “Removable Disk” will appear in “My Computer”.
d
Copy the upgrade file to “Removable Disk”.
→ The “Connected to PC. Do not disconnect the USB
cable.” message will appear.
e
When the message disappears, press
.
→ The upgrade file is downloaded.
f
Unplug the USB cable, and turn the
machine off and on again.
Note
If an error occurs, a red text error message will
appear. If the download is performed
successfully, an “Upgrade complete.”
message will appear.