Instruction manual

SEWING THE STITCHES
64
a
Select a stitch.
b
Attach presser foot “J”.
* Attach presser foot “N” when you select .
c
Hold the thread tails and fabric with your
left hand, and turn the handwheel with
your right hand to insert the needle into the
fabric.
a Sewing start position
d
Lower the presser foot, and hold the
“Reverse/Reinforcement Stitch” button to
sew 3-4 stitches.
→ The machine sews reverse stitches (or reinforcement
stitches).
e
Press the “Start/Stop” button to sew
forward.
a Reverse stitches
→ The machine will begin sewing slowly.
f
When sewing is completed, hold the
“Reverse/Reinforcement Stitch” button to
sew 3-4 reverse stitches (or reinforcement
stitches) at the end of the seam.
g
After sewing, press the “Thread Cutter”
button to trim the threads.
a
a
CAUTION
Be sure the needle does not strike a basting pin, or
any other objects, during sewing. The thread
could tangle or the needle could break, causing
injury.
Memo
When the automatic thread cutting and
automatic reinforcement stitch keys on the
screen are selected, reverse stitches (or
reinforcement stitches) will be sewn
automatically at the beginning of sewing when
the “Start/Stop” button is pressed. Press the
“Reverse/Reinforcement Stitch” button to sew
reverse stitches (or reinforcement stitches)
and trim the thread automatically at the end of
sewing.