Operation Manual

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
5
No. Part Name Part Code
1 Buttonhole foot “A” X57789-151
2 Embroidery foot “W” XC8156-451
3 Overcasting foot “G” XC3098-051
4 Monogramming foot “N” X53840-351
5 Zipper foot “I” X59370-051
6 Zigzag foot “J” (on machine) XC3021-051
7 Blind stitch foot “R” X56409-051
8 Button fitting foot “M” 130489-001
9 Walking foot X59816-104
10 Free-motion quilting foot XA6928-001
11 Straight stitch foot XD0826-051
12 Seam ripper X54243-001
13 Bobbin " 10 X52860-150
14 Needle set X58358-051
15 Twin needle X59296-151
16 Ball point needle set XD0705-051
17 Scissors 184783-051
18 Chalk pen 184944-001
19 Cleaning brush X59476-051
20 Eyelet punch 135793-001
21 Screwdriver (large) X55467-051
22 Screwdriver (small) X55468-051
23 Spool cap (small) 130013-154
24 Spool cap (medium) " 2 X55260-153
25 Spool cap (large) 130012-054
26 Vertical spool pin XC8619-051
27 Spool felt X57045-051
28 Disc-shaped screwdriver XC1074-051
29 Spool net XA5523-050
30 Embroidery frame set (small)
H 2 cm " W 6 cm
(H 1 inch " W 2-1/2 inches)
EF73: Frame
EF77: Embroidery sheet
31
Embroidery frame set
(medium) H 10 cm
" W 10 cm
(H 4 inches
" W 4 inches)
EF74: Frame
EF78: Embroidery sheet
32 Embroidery frame set (large)
H 18 cm " W 13 cm
(H 7 inches " W 5 inches)
EF75: Frame
EF79: Embroidery sheet
33 Embroidery frame set (extra
large) H 30 cm " W 18 cm
(H 12 inches " W 7 inches)
EF76: Frame
EF80: Embroidery sheet
34 Foot controller XC8028-051
35 Embroidery needle plate
cover
XA9939-051
36 Touch pen (stylus) XA9940-051
37 Knee lifter XA6941-051
38 USB cable XC8897-051
39 Alternate bobbin case (pink
screw)
XC8167-251
40 Straight stitch needle plate XC8362-051
41 Cord guide bobbin cover (with
single hole)
XC8449-051
42 Embroidery bobbin thread BBT-W
43 Stabilizer material X81176-001
44 Instruction and reference
guide
XD0781-051
45 Quick reference guide XD0792-051
46 Additional accessories guide XC8504-051
47 Embroidery unit carrying
case
XC8150-051
48 Hard case XC7750-053
49 LCD cover XC8468-051
50 Bobbin center pin XC8661-051
Memo
(For U.S.A. only)
Foot controller: Model S
This foot controller can be used with this
machine model BLG.
Memo
• Always use accessories recommended for
this machine.
• The screw of the presser foot holder is avail-
able through your authorized retailer (Part
code XA4813-051).
• Included accessories 34, 44, 45 and 46 can
be stored in the machine’s hard case.