Operation Manual

SEWING AN EMBROIDERY PATTERN
150
■ When Threading Manually
!
Thread the machine manually with the first
color (see “Threading Manually” on page
29).
"
Lower the presser foot, then press the
“Start/Stop” button to start embroidering.
After 5-6 stitches, press the “Start/Stop”
button again to stop the machine.
#
Trim the excess thread at the start of the
color. If the end of the thread is under the
presser foot, raise the presser foot, then
trim the excess thread.
$
Press the “Start/Stop” button again to
restart the machine.
%
Repeat steps # and $ from the previous
section.
Sewing Embroidery Patterns
Which Use Appliqué
There are some patterns which call for an appliqué
inside the pattern.
When sewing an embroidery pattern with an
appliqué, the color sewing order display shows
“Appliqué Material”, “Appliqué Position”,
“Appliqué”, and then the sewing order of the
colors around the appliqué.
!
Attach an iron-on stabilizer to the wrong
side of the appliqué material.
a Appliqué material (cotton, felt, etc.)
b Iron-on stabilizer
"
Place the appliqué material into the
embroidery frame, and then press the
“Start/Stop” button to sew the outline of
the appliqué.
a Outline of appliqué
b Appliqué material
! The machine will sew around the outline of the
appliqué pieces and will then stop.
Memo
If there is thread left over from the beginning
of sewing, it may be sewn over as you con-
tinue embroidering the pattern, making it very
difficult to deal with the thread after the pattern
is finished. Trim the threads at the beginning.
Memo
Depending on the thread color display setting,
the display may show ,
, or .
Memo
The embroidery procedure is the same as the
basic procedure explained on pages 149
through 150.
a
b
a
b