Operation Manual

ADJUSTMENTS DURING THE EMBROIDERY PROCESS
Embroidery
153
5
If the Thread Breaks During Sewing
!
Press the “Start/Stop” button to stop the
machine.
"
If the upper thread is broken, redo the
upper threading. If the bobbin thread is
broken, press and follow the
directions in steps
! through $ from the
previous section to reset the bobbin.
#
Press .
$
Press , , or to move the
needle back the correct number of stitches
before the spot where the thread broke.
* If you cannot move back to the spot where the
thread broke, press to select the color and
move to the beginning position of that color, then
use , , or to move ahead to
slightly before where the thread broke.
%
Press to return to the original
screen.
&
Press the “Presser Foot Lifter” button to
lower the presser foot, and press the “Start/
Stop” button to continue sewing.
Restarting from the Beginning
!
Press .
"
Press .
! The embroidery frame moves, returning the needle
to the pattern’s beginning position.
#
Press the “Presser Foot Lifter” button to
lower the presser foot and start sewing.