Operation Manual

UPGRADING YOUR MACHINE’S SOFTWARE
Appendix
217
7
Upgrade Procedure Using
Computer
!
While pressing the “Automatic Threading”
button, turn the main power to ON.
! The following screen will appear on the LCD.
"
Press .
#
Plug the USB cable connector into the
corresponding USB port connectors for the
computer and for the machine.
! “Removable Disk” will appear in “My Computer”.
$
Copy the upgrade file to “Removable Disk”.
! The “Connected to PC. Do not disconnect the USB
cable.” message will appear.
%
When the message disappears, press
.
! The upgrade file is downloaded.
&
Unplug the USB cable, and turn the
machine off and on again.
Note
If an error occurs, a red text error message will
appear. If the download is performed success-
fully, an “Upgrade complete.” message will
appear.