Operation Manual
CHANGING THE NEEDLE
36
CHANGING THE NEEDLE
!
Press the “Needle Position” button to raise
the needle.
"
Press .
! The key appears as .
#
Use the screwdriver to turn the screw
toward the front of the machine and loosen
the screw, then remove the needle.
CAUTION
• Always press on the screen before changing the needle. If is not pressed and the Start/
Stop button or another operation button is pressed accidentally, the machine will start and injury may
result.
• Use only sewing machine needles made for home use-type 130/705H needle. Other needles may bend or
break and may cause injury.
• Never sew with a bent needle. A bent needle will easily break and may cause injury.
Memo
To check the needle correctly, place the flat
side of the needle on a flat surface. Check the
needle from the top and the sides. Throw
away any bent needles.
a Parallel space
b Level surface (bobbin cover, glass, etc.)
b
a
Note
• Do not apply pressure to the needle clamp
screw. Doing so may damage the needle or
machine.