Operation Manual

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
6
* See Additional Accessories Guide for presser foot instruc-
tion.
No. Part Name Part Code
1 Buttonhole foot “A” X57789-151
2 Embroidery foot “W” XC8156-451
3 Overcasting foot “G” XC3098-051
4 Monogramming foot “N” X53840-351
5 Zipper foot “I” X59370-051
6 Zigzag foot “J” (on machine) XC3021-051
7 Blind stitch foot “R” X56409-051
8 Button fitting foot “M” 130489-001
9 Walking foot X59816-104
10 Free-motion quilting foot “C” XE0765-001
11 Free-motion open toe quilting
foot “O”
XE0767-001
12 Free-motion echo quilting foot
“E”
XE0766-001
13 Straight stitch foot XD0826-051
14 Blind stitch foot (with guide)* XA0059-001
15 Narrow hemmer foot* 184600-001
16 Cording foot (3 cord guide)* XA6871-001
17 Seam ripper X54243-001
18 Bobbin × 10 X52860-150
19 Needle set X58358-051
20 Twin needle X59296-151
21 Ball point needle set XD0705-051
22 Scissors 184783-051
23 Chalk pen 184944-001
24 Cleaning brush X59476-051
25 Eyelet punch 135793-001
26 Screwdriver (large) X55467-051
27 Screwdriver (small) X55468-051
28 Spool cap (small) 130013-154
29 Spool cap (medium) × 2 X55260-153
30 Spool cap (large) 130012-054
31 Vertical spool pin XC8619-051
32 Spool felt X57045-051
33 Disc-shaped screwdriver XC1074-051
34 Spool net XA5523-050
35 Embroidery frame set (small)
H 2 cm × W 6 cm
(H 1 inch × W 2-1/2 inches)
EF73: Frame
EF77: Embroidery sheet
36
Embroidery frame set
(medium) H 10 cm
× W 10 cm
(H 4 inches
× W 4 inches)
EF74: Frame
EF78: Embroidery sheet
37 Embroidery frame set (large)
H 18 cm × W 13 cm
(H 7 inches × W 5 inches)
EF75: Frame
EF79: Embroidery sheet
38 Embroidery frame set (extra
large) H 30 cm × W 18 cm
(H 12 inches × W 7 inches)
EF76: Frame
EF80: Embroidery sheet
39 Foot controller XC8028-051
40 Embroidery needle plate
cover
XA9939-051
41 Touch pen (stylus) XA9940-051
42 Knee lifter XA6941-051
43 USB cable XD0745-051
44 Alternate bobbin case (pink
screw)
XC8167-251
45 Straight stitch needle plate XC8362-051
46 Cord guide bobbin cover (with
single hole)
XC8449-051
47 Embroidery bobbin thread BBT-W
48 Stabilizer material X81176-001
49 Instruction and reference
guide
BLG2-NZ: XE2638-001
BLG2: XE2542-001
50 Quick reference guide BLG2-NZ: XE2640-001
BLG2: XE2543-001
51 Additional accessories guide BLG2-NZ: XE2639-001
BLG2: XE2554-001
52 Embroidery unit carrying
case
XC8150-051
53 Hard case XC7750-053
54 LCD cover XC8468-051
55 Bobbin center pin XC8661-051
56 Bobbin cover XE0756-001
57 Power cord XC6052-051
Memo
(For U.S.A. only)
Foot controller: Model S
This foot controller can be used with this
machine models: BLG2-NZ/BLG2.
Memo
• Always use accessories recommended for
this machine.
• The screw of the presser foot holder is
available through your authorized retailer
(Part code XA4813-051).
• Included accessories 39, 49, 50 and 51 can
be stored in the machine’s hard case.
No. Part Name Part Code