Operation Manual

COMBINING PATTERNS
222
■ Selecting combined embroidery
patterns
If multiple patterns have been combined, use
to select the pattern to be edited. If a
USB mouse is connected, the pattern can be
selected by clicking it. Move the mouse to position
the pointer over the desired pattern, and then click
the left mouse button. In addition, patterns can be
selected by directly touching the screen with your
finger or touch pen.
Sewing Combined Patterns
Combined patterns will be embroidered in the
order they were entered. In this example, the
embroidery order will be as follows:
→
a
Embroider by following the
color order on the right side of the display.
→ When the design is finished, the [+] cursor will
move to the “Sewing” part of the pattern.
b
Embroider .
→ When “Sewing” is embroidered, the display returns
to the sewing screen.
Memo
• Use to select patterns that are
overlapping and cannot be selected by
clicking them or by touching the screen.
Note
Follow the directions in “Sewing Embroidery
Patterns” on page 166.