Extra Information

25
Precautions on Drawing
• Donottrytollanareawithlines,otherwisethedrawingcannotbeconvertedtoembroiderydata.
• Colorcanonlyllanoutlinedarea.Besuretodesigntheareathatyouwishtollwithcolorsothatit
is outlined. In addition, a very small area (thin area) cannot be filled.
• Afterselectingthecolorofanarea,linesofthedrawingotherthanthosedrawnfreehandcannotbe
edited or added. To change a line other than one drawn freehand, press
to return the drawing
to the point before the first color of an area was selected. Before adding color to the drawing, be sure
that the shape of the lines is as desired.
• Thenumberofdrawingoperationsarelimited.Oncethislimitisreached,
the error message shown at the right appears and no operation other
than pressing
can be performed.
Once the drawing is finished, add colors as desired.
* If no colors are to be added, continue with the procedure described in “3 Specifying Stitching Settings” on
page 31. If a stitching method is not to be specified, continue with the procedure described in “4 Converting
to Embroidery Data” on page 35.
* To clear the entire area and start a new drawing, press
. All data that had been drawn is
erased, and the screen appears as it did when On Screen Designer™ was started up (see page 45).
* To close the application and use the sewing machine, press
. All data that had been drawn
is erased (see page 46).
* To save created data, continue with the procedure described in “Saving Image Data” on page 42.