Extra Information

Specifying Stitching Settings

Lines of the drawing are sewn with satin stitches and areas are sewn with ﬁll stitches.

The following settings can be speciﬁed.

1 Satin stitch (lines): thickness and stitch density

2 Fill stitch (areas): sewing direction and stitch density

If the drawing data is saved, the settings can be changed after a trial embroidery of the

design is sewn. (Refer to “Saving Image Data” on page 42.)

1. Displaying the Stitching Settings

Screen

Press .

2 The screen shown at the left appears.

1 Reduces the size of the pattern

The size of the drawn pattern can be changed. (Refer to

page 34.)

2 Speciﬁes the width of the satin stitches used to sew the

lines of the drawing (Refer to page 32.)

3 Speciﬁes the sewing direction for ﬁll stitches (Refer to

page 32.)

4 Speciﬁes the stitch density (Refer to page 33.)

5 Corrects shrinkage

When sewing embroidery, stitched areas may shrink. If

this happens, the stitching can be corrected to prevent

shrinkage. (Refer to page 47.)

* To quit specifying settings, press

Notes

• Youcanusethepentabletforoperationsinthestitchingsettings

screen while moving tablet pen without touching tablet until you are

ready to make selection.