Extra Information

32
2. Specifying the Width of Satin
Stitches
1
Press or beside .
(The default setting is 2.0 mm when the application is
started up.)
To select a narrower width, press . To select a
wider width, press .
Each press of
makes the width narrower by 0.5
mm.
Each press of
makes the width wider by 0.5
mm.
A setting between 1.0 mm and 3.0 mm in 0.5 mm
increments can be specified.
Setting examples
1.0mm 2.0mm 3.0mm
3. Specifying the Sewing Direction of
Fill Stitches
1
Press or beside .
( The default setting is when the application is
started up .)
Each press of changes the setting in the
following order: → → . Press to
reverse the order of .
Setting examples
Notes
• Ifthesizeofthecreatedpatternislargerthan100mm×100mm,
it is recommended that be set in order to prevent shrinkage.