Extra Information

Converting to Embroidery Data

Now, the created image data can be converted to embroidery data.

1 Press .

The following message appears.

If the image data is correctly converted to embroidery

data, the embroidery data check screen shown at the

left appears. The pattern moves to the center of the

embroidery pattern display area and the embroidery data

is displayed.

If the message shown at

the left appears, either the

drawing contains too many

lines or the design is too

complicated to be converted

to embroidery data.

Press

to return to the

pattern drawing screen, and

then correct the data.

In this screen, the number of thread colors and the

number of stitches in the created pattern can be

checked. For details on the various displays, refer to

“Embroidery Data Check Screen” on page 12.

To change the pattern, press to change the embroidery data back to image data and

display it in the pattern drawing screen.

* However, lines of the drawing other than those drawn freehand to close openings cannot be added, edited

or their color changed. To change a line, continue pressing

until the drawing returns to the condition

before the ﬁrst color of an area was selected.