Extra Information

42
Saving Image Data
Saved data that has been converted to embroidery data cannot be recalled with On Screen
Designer™. To recall data and edit it with On Screen Designer™, save the image data on
USB media before converting it to embroidery data or press after the conversion to
return to the pattern drawing screen, and then save the data.
1 Insert USB media into the USB port located on the
right side of the machine.
Caution
• DonotinsertanythingotherthanUSBmediaintothe
USB media port. Otherwise, the USB media drive may
be damaged.
• DonotinsertUSBmediacontainingpatterndataother
than those saved using this application. (Only .pm7 and
.phc data can be used.)
2 Press .
* If the pattern is displayed in the enlarged area, the enlarged
display will be canceled, then the pattern is saved.
* If the
key or the key is selected when saving data
before the area thread color key has been selected, the
key will be selected instead, then the pattern is saved.
3 The screen shown at the left appears. If the image
data was saved successfully, the previous screen
automatically appears.
* Saving image data takes approximately 3 seconds.
Caution
 Donotturnoffthemachinewhilethe[Saving]messageis
displayed, otherwise saved data may be lost. In addition,
do not try to remove the USB media, otherwise the USB
media may be damaged.