Extra Information

7
2 Insert the USB media containing the application into
the primary (top) USB port on the right side of the
machine.
Caution
• DonotinsertanythingotherthanUSBmediaintothe
USB media port. Otherwise, the USB media drive may
be damaged.
• DonotinsertUSBmediacontainingpatterndataother
than those saved using this application. (Only .pm7 and
.phc data can be used.)
3 Turn on the sewing machine.
4 Press the opening screen. A screen that allows you
to select the application or sewing machine, like what
is shown at the left, appears.
* If USB media that does not contain the application is
inserted, the home screen appears.
5 Press the icon for the application. On Screen
Designer™ starts up.
Caution
Do not turn off the machine or remove the USB media while
the application is starting up, otherwise the USB media may
be damaged.
Notes
• If you have turned off the sewing machine while embroidering,
previously embroidered pattern will not be recalled when you turn
on the machine again.
Closing the Application
1 To close On Screen Designer™, turn off the sewing
machine.
To close the application to use the sewing machine,
press . (Refer to page 46.)
Notes
• When the application is closed, the currently displayed datais
deleted. Be sure to save any necessary data before closing the
application.