Specifications

Halogen Gas Monitor – MultiZone Remote Display
Instruction 3015-5157 11
Mounting Instructions
The HGM-RD should be installed plumb and level and securely fastened to a rigid mounting surface.
The enclosure utilizes keyhole mounting brackets designed for ¼ inch fasteners. Locate the four screws as
shown in the diagram below or by using the provided mounting template. Allow the screw heads to protrude
approximately 1/4".
HGM-RD Mounting Specs
Hold the monitor flat against the mounting surface and allow it to slide down engaging the screw heads in the
keyhole slots of the mounting brackets. Adjust the screws as necessary to hold the monitor securely against
the mounting surface.