Specifications

Halogen Gas Monitor – MultiZone Remote Display
Instruction 3015-5157 22
Navigating to the 1
st
and then 2
nd
HGM Setup Screen
From the System Screen, select the HGM-MZ you wish to set up. Press the ENTER key to access that
unit’s HGM Setup Screen #1.
System Screen HGM Setup Screen #1
On HGM Setup Screen #1, select the SETUP option to go to HGM Setup Screen #2. To return to the
System Screen, press ESC.
HGM Setup Screen #2
Location
This is the name you assign to the HGM-MZ to identify its location. It may have up to 12 alphanumeric
characters.
1. Press the ENTER key to adjust the setting.
2. Use the LEFT/RIGHT cursor keys to move across the entry field and the UP/DOWN cursor keys to
modify the individual characters.
3. Press ENTER to accept the new entry or ESC to revert to the previous setting.
Number of Zones Installed
IMPORTANT: Do not change the number of zones to deactivate excess zones. Instead, go to the individual
zone that you wish to disable and set its distance to zero (refer to Navigating to the 1st Zone Setup Screen on