Specifications

Halogen Gas Monitor – MultiZone Remote Display

Instruction 3015-5157

Safety Precautions

AC Power Supply

The HGM-RD uses a universal power supply that is capable of accepting inputs of 100 to 240 VAC, 50/60 Hz.

Ensure the source voltage matches the voltage of the product before energizing the equipment. It is highly

suggested that the HGM-RD be placed on its own circuit with UPS or surge protection.

Protective Grounding

Under no circumstances should the HGM-RD be operated without connection to a protective ground. Doing

so poses a potential shock hazard and is also a violation of electrical safety standards applicable to this type

of equipment.

Explosive Atmosphere

Do not operate this equipment in the presence of flammable liquids, vapors or aerosols. Operation of any

electrical instrument in such an environment constitutes a safety hazard.

Proper Exhaust Venting

It is imperative that the exhaust port on this instrument be properly vented as described in this manual.

Failure to do so may constitute a safety hazard.

Accessing the Interior of the Monitor

Extreme care should be exercised when accessing the interior of the monitor. Only qualified electrical

maintenance personnel should perform connections and adjustments. Always remove AC power before

working inside the monitor.

Misuse and Modifications to the Monitor

The protection provided by the monitor may be impaired if the monitor is used in a manner not specified by

Bacharach, Inc. Modifications to this monitor, not expressly approved, will void the warranty.

In Case of Malfunction

Do not continue to use this equipment if there are any symptoms of malfunction or failure. In the case of such

occurrence, de-energize the power supply and contact a qualified repair technician or the nearest Bacharach

Service Center. Use ONLY the provided knockouts for electrical and communication wiring. Drilling into the

box will void the warranty.

Installation Category

Installation Category II, Pollution Degree II, as defined by UL.

Altitude Limit

6,562 ft (2,000 m)

Cleaning

To clean the outside of the case use a DRY CLOTH. DO NOT use soap and water.