Instruction manual

USER MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance. It contains no user serviceable parts. Do not try to
repair it yourself. Any servicing requiring disassembly other than cleaning must be performed
by a qualified appliance repair technician.
CARE & CLEANING INSTRUCTIONS
CAUTION: Never immerse the Popcorn Maker main unit/popcorn chamber, cord or plug
in water or other liquid.
1. Unplug The Popcorn Maker and allow the stainless steel kettle to fully cool before
cleaning.
2. The Popcorn Maker should be cleaned after every use.
3. Remove the crank. Hold the kettle and turn the crank clockwise to detach.
4. Remove the kettle from the motor. Slide each side of the rotating rod up and out of the
brackets on each side of the main unit’s popping chamber.
5. Detach the power cord from the kettle’s heating element receptacle located at the bottom
rear of the kettle unit.
6. Use a clean kitchen brush and a small dustpan to sweep the floor of the popcorn
chamber. If needed, use a damp soft cloth or kitchen sponge to wipe down and remove
any debris from the main unit’s main unit. Dry thoroughly before next use.
WARNING: To prevent scratching, never use abrasive scouring pads, steel wool, or
scouring powders.
7. Fill the stainless steel kettle 2/3 full with warm, soapy water. Soak for 15 to 20 minutes,
then empty. Use a soft cloth or sponge to remove any debris. Rinse thoroughly and dry.
CAUTION: To protect against electrical shock, do not immerse stainless steel kettle
or plugs in water or other liquids. Avoid letting the kettle motor cord receptacle
come into contact with water.
CAUTION: Never place the main unit, any parts or accessories of this Popcorn
Maker in the dishwasher.
8. Always attach the Popcorn Maker’s kettle to the motor after cleaning.
STORAGE INSTRUCTIONS
1. Unplug unit and allow to cool.
2. Store the clean Popcorn Maker fully assembled.
3. Store the Popcorn Maker in its box or in a clean, dry place.
7