Instructions / Assembly

BOLT WH

5/16 x 2-1/2

H100194

(x2)

PRE-ASSEMBLY STEP 1 - SORTING PARTS

It is critical for ease of assembly that you take the time to sort and organize the wood and

hardware.

WOOD PARTS:

• Organize wood parts by the three-digit, alpha-numeric number stamped on each board (ex. P01).

• If there are multiple boards with the same stamped number, stack those pieces together.

• Stamps can be found on the flat surface of the boards or on the end of the boards.

• Allow yourself plenty of room - the wood pieces can take up a significant amount of space.

HARDWARE PARTS:

• We recommend that you have a separate table to organize the hardware.

• Hardware bags are printed with a seven-digit, alpha-numeric part number.

• You can organize your hardware by part number or group by hardware type (i.e. bolts, nuts, etc.).

• During assembly you only need to reference the last four digits of the number.

NOTE: CARTONS ARE NOT ORGANIZED BY BOARD NUMBER.