Datasheet

207
> Switches 208
From 1 to 24 poles,
each pole being a path for the current,
the circuit being open at starting position 0, and closed at position 1
> 2 way change-over switches without off position 209
From 1 to 12 poles,
each pole having 2 current paths, one path is closed
at position 1, the other at position 2
The two paths can be joined by a common point (link)
> 2 way change-over switches with off position 210
From 1 to 12 poles,
each pole having 2 current paths, one path is closed
at position 1, the other at position 2. Both paths can be open at
position 0 and joined by a common point (link)
> 3 to 8-way cam switches 211
Each pole having respectively 3 to 8 paths for the current,
the number of poles multiplied by the number of ways must be 24 or less
The starting position is either 0 (diagram with OFF) or 1 (diagram without OFF)
The current paths of the same pole are connected together by links
> Grouping switches 223
From 2 to 4 ways with or without starting position at 0,
each pole having respectively 2 to 4 current paths
which close consecutively and remain closed on the following positions,
thus grouping 2 to 4 elements
The current paths of the same pole are connected together by links
> Instrument switches 226
For ammeters wired without a CT or with several CTs connected on the corresponding circuits 226
The CTs can be mounted in series, with a common point or independently,
they are always short-circuited when not feeding the ammeters
For voltmeters wired into 3-phase networks with or without neutral 228
> Motor control switches 229
For 3-phase asynchronous motors with Y - L starting, with several speeds,
with or without reversing
> Switches for coupling 2 or 3 resistors 235
> Coding switches 237
Code BC
D and additional BCD
Separate cam switches
II-CHOICEOFFUNCTION(DIAGRAMANDSWITCHINGANGLE)
>
To order your cam switch, it is essential to follow the 5-step procedure (see presentation on p. 123)
Mini cam switches are only available in standard versions.
FUNCTIONS
PageDiagram
A
V