User's Manual
Table Of Contents
GALAXY® II Gateway Receiver
ELECTRICAL CONNECTIONS
AC Power
Badger Meter provides an AC-to-DC power supply with power cord that plugs into a standard three-prong 120V AC outlet. If
powering the gateway directly via DC power, please refer to the DC power information on page 19.
Figure 11: 120V AC power supply with power cord
M12 Connector Assembly
OTE:N Use only approved Badger Meter power cable, 100-feet (66233-010) or 300-feet (66233-013) for this assembly.
Tools and Materials
• M12 plug, 8-conductor connector (66525-002)
• Badger Meter power cable, 100 feet or 300 feet with 308 in-line connector end
• 308 in-line connector anti-tamper collar
• Outdoor-rated Cat5e Ethernet cable (LAN gateways only) (customer supplied)
• Coax stripper (customer supplied)
• Wire stripper for 22 AWG wires (customer supplied)
• Precision slotted screwdriver with blade size of 2.4 mm (0.094") (customer supplied)
M12 Plug Connector Part Names
Figure 12: M12 plug connector parts
1. Push the connector parts onto the power cable in the following order: pressure nut, clamping cage, cable seal, sleeve
with O-ring and nally, the coupling sleeve.
2. Strip the cable outer jacket to a maximum length of 1.1 inches.
Insert Coupling Sleeve
Sleeve
w/O-ring
Cable
Seal
Clamping
Cage
Pressure
Nut
Page 14 February 2014