User's Manual

Installation Manual
RJ45 Plug Assembly (for LAN connectivity only)
OTE:N Do not use a serial-to-LAN adapter!
Figure 21: Serial-to-LAN adapter kit
Required Supplies:
• RJ45 Plug Assembly (66527-001)
• Ethernet cable cord set using outdoor rated Cat.5e cable and RJ45 jack (customer supplied)
• Wrenches, 1-1/16 inch (customer supplied)
Metallic Housing Insulator Insert Halves Cable Gland
Figure 22: RJ45 plug components
1. Feed the cord set cable through the dome nut end of the cable gland.
2. Push down the RJ45 plug latch and place it inside one half of the insulator insert.
RJ45 PLUG
LATCH
HALF INSULATOR
INSERT
HALF INSULATOR
INSERT
RJ STOP®
PATENT
AUDIBLE
LOCKING
Figure 23: Insulator assembly
3. Attach the other half of the insulator insert as shown. You will hear a ”click“ when the connection is made.
Page 21 February 2014