Replacement Part List

Place the machine on a flat stable surface, with the fuel tank cap facing upwards.
Clean the fuel tank cap and the surrounding area to avoid any dirt from entering the
tank during refilling.
Carefully open the fuel tank cap to allow the pressure inside to decrease gradually.
Unscrew the tank cap and remove it.
Pour in the fuel carefully, avoid spilling.
Screw the tank cap on firmly by hand.
Draining fuel
Hold a collection container beneath the fuel drain bolt.
Unscrew the tank cap and remove it.
- Allow the fuel to run out completely.
- Screw the tank cap on firmly by hand.
WARNING! Always close the fuel tank cap firmly.
WARNING! Immediately clean all traces of fuel which may have dripped on the
machine or the ground and do not start the engine until the petrol fumes have
dissipated.
10
Filling with fuel
Danger of injury!
Fuel is explosive!
- Turn off and cool the motor down before filling the tank with fuel.
- You must observe all safety instructions relating to handing fuel.
Risk of device damage!
The device is supplied without motor or gearbox oil.
Before operating, you must fill it with fuel.
WARNING! Take care of the emission of exhaust gases. Always shut off engine
before fueling. Never add fuel to a machine with a running or hot engine. Take care
of fire!
WARNING! Never smoke whilst
refueling and avoid inhaling the petrol fumes.
WARNING! Carefully open the tank top as pressure could have formed inside.