Replacement Part List

Change and clean the spark plug
-Periodically remove and clean the spark plug using a metal brush to get rid of any
deposits.
-Check and reset the correct distance between the electrodes.
-Replace the spark plug and fasten it firmly using the supplied wrench.
-The spark plug must be replaced with one with the same characteristics whenever the
electrodes have burnt or the insulation has worn, and in any case every 100 working hours.
Clean the air filter
IMPORTANT Cleaning the air filter is essential to
guarantee the efficiency and duration of
the machine. Do not work with a damaged filter or without a filter, as this could permanently
damage the engine. It must be cleaned after every 12 working hours.
Clean the filter as follows:
Loosen the knob, remove the cover and the filter element
Wash the filter element with soap and water. Do not use petrol or other solvents.
Leave the filter to dry in the open air.
Fit the filter element and the cover back on, tightening the knob again
.
Warning!
Never run the engine without the air filter element installed.
16