Installation Guide

ManualsBrandsBAE Systems ManualsElectronicsFirst InterComm VCA100 model L1FCGX-LF

First InterComm

™

System Installation Guide

A29799 Page 5

November 2007

3.0 Planning the Installation

3.1 Installation Kit Components

Table 2 lists the deliverable installation kit for the First InterComm system. Specific

antennas will vary depending on the LMR frequency. The material listed is based on

availability; equivalent products may be used.

Table 3 lists typical Installer-supplied parts that are vehicle specific and not supplied

with the kit.

Table 2. VCA 100 Vehicle Installation Kit

Description Part Number Vendor Qty

VCA100 Power Harness 8422765-2 Scott Electronics 1

Screws, center sunk head, #6-32 x .500 lg 91802A148 McMaster-Carr 4

12 VDC Power Cable, 16 AWG (red) for

Specification SAEJ1128

WX16-2 (SXL 16 ga) Waytek, Inc 20’

12 VDC Power Cable, 20 AWG (orange) for

Specification SAEJ1128-GPT

WG20-3 (GPT 20 ga) Waytek, Inc 15’

Butt Splice, 16 ga Environmentally Sealed 31980 Waytek, Inc 2

Butt Splice, Step Down, 16ga to 20 ga,

environmentally sealed

38058 Waytek, Inc 1

Butt Splice, 20 ga Environmentally Sealed 30980 Waytek, Inc 2

ATO/ATC Fuse Holder with GXL wire 46047 Waytek, Inc 1

ATO/ATC Fuse, 10 A 46210 Waytek, Inc 1

LMR Antenna, through mount, with hardware Various Multiple 1

WiFi Antenna, elevated feed, 5dBi gain, 2.4GHz,

through mount, 3/4-inch hole

A10245B Comtelco 1

WiFi Through mount base w/ 12’ cable and reverse

polarity SMA connector

CEZM10-RP Comtelco 1

Table 3. Installer Supplied Parts

Description Part Number Vendor Quantity

SPST Switch, illuminating, 1 A (minimum) 44206 or similar Waytek, Inc 1

Ground Wire, 18 AWG (black) Varies Tessco As Required

Ring Terminal, size as needed (Gnd) Varies Panduit 2

Terminals, size as needed (switch) Varies Panduit 3

Terminal, size as needed (main power cut in) Varies Panduit 1

Grommet, rubber, various sizes Varies Waytek, Inc As Required

Cable Ties, Nylon PLT1.5I-C20 Panduit As Required

Cable Tie mount, 4-way ABMM-AT-C0 Panduit As Required

Screws, self tapping, #8-32, .500 lg 98273A225 McMaster-Carr 9

Washers, size as needed Varies McMaster-Carr 3