Specification Sheet

339
SPECIFICATIONS – PL-1340
Max Swing Over Bed 13" 330 mm
Max Swing Over Cross Slide 7.79" 198 mm
Max Swing in Gap
Diameter 18.75" 477 mm
Length 4.5" 115 mm
Center
Height 6.5" 165 mm
Length 39" 990 mm
Bed
Width 7.375" 188 mm
Length 5.125" 130 mm
Height 11.41" 290 mm
Spindle
Bore 1.5" 38 mm
Nose D1 –4"
Taper (nose) Morse #5
Taper (sleeve) Morse #3
Speeds
Number 8
Range 70 – 2000 rpm
Cross Slide
Width 4.625" 118 mm
Travel 6.29" 160 mm
Compound Rest
Width 3" 76 mm
Travel 2.68" 68 mm
Lead Screw
Diameter .875" 22 mm
Thread 8 T.P.I.
Feed Rod .75 dia. 19 mm
Cutting Tool (max. section) .625" x .625" 16 mm x 16 mm
Threads
Imperial (qty./type) 31 / 4–56 T.P.I.
Metric (qty./type) 26 / .4–7 mm pitch
Diametrical (qty./type) 32 / 8–120 D.P.
Module (qty./type) 21 / .2–3 M.P.
Longitudinal Feeds
Imperial (qty./speed) 32 / .0020" – .5480" / rev.
Metric (qty./speed) 32 / .052 – 13.92 mm / rev.
Cross Feeds
Imperial (qty./speed) 32 / .0007" – .0187" / rev.
Metric (qty./speed) 32 / .018 – .475 mm / rev.
Tailstock
Diameter 1.65" 42 mm
Travel 4.5" 114 mm
Taper Morse #3
Set Over +/– .375" +/– 10 mm
Motor Coolant 1/8 hp
Motor Main 2 hp
Power Requirement 220V / 1-phase
Shipping
Dimensions (L x W x H)
79" x 33" x 59" 2006 x 838 x 1500 mm
Shipping Weight 1,628 lbs. 740 kgs.
Lathes – PL-1340
u
Capacity—
13" swing over bed, 40"
between centers
u
Mitutoyo 2-axis DRO–standard
u
8–step spindle speed
u
6" three-jaw chuck
u
Integrated coolant system
u
Headstock chuck guard with
micro switch cutout
u
4-way quick change tool post
with guard
u
220V 1-phase
Specications subject to change without notice.