Service manual

Bair Hugger Model 775 Temperature Management Unit Service Manual

Check the 3M

Bair Hugger

therapy website to ensure you have the most recent version of this document. www.bairhugger.com reorder #202526A

Returning Units for Service

Tools/equipment

• 3M Patient Warming service carton

• Tape dispenser

• Shipping label

• Marking pen

Method

1� Call Technical Support (see page 25 for contact information) to get a Return Authorization (RA)

number and a service carton�

2� Remove the top foam piece� If the plastic liner is available, use it to enclose the temperature

management unit�

3� Lower the temperature management unit carefully into the carton�

4� Replace the top foam piece� Observe proper orientation� Hose will extend out in the corner of foam�

5� Lay the unit hose on top of the foam piece around the edge�

6� Seal the carton with tape�

7� Apply the shipping label addressed to 3M Patient Warming�

8� Write the RA number on the outside of the carton�

9� Ship to 3M Patient Warming�