Owner`s manual

CABINET INSTALLATION

INSTALLATION INSTRUCTIONS FOR CABINET DRAIN VALVE BAJA SPA'S EQUIPPED WITH THE THRU

CABINET DRAIN VALVE WILL INCLUDE:

! Cabinet panel with removable 1 ½” black plug .

! Place this panel in the LEFT CORNER position on

models # 1043/44/54/57/58/67/68and in LEFT SIDE panel position on

Models # 1040/42/46/50/56.

! Black drain valve located to the left of the equipment pack, attached to clear

hose with a ¾ hose clamp.

PLEASE FOLLOW THESE INSTALLATION INSTRUCTIONS, PRIOR TO SKIRT ASSEMBLY AND FILLING THE

SPA WITH WATER:

! Remove / slide clamp with pliers and take out drain valve from clear hose.

! Discard black cabinet plug and install drain thru hole and secure back nut.

! Place panel in place, making sure there are no crimps in line.

! Secure valve to cabinet.

! Re-attach clear hose completely over barbs and re-secure with clamp.

! Complete cabinet installation.

TO DRAIN SPA- MAKE SURE EQUIPMENT IS IN OFF POSITION

! Simply remove the drain cap.

! Attach a garden hose to threads.

! Turn front face counter-clockwise and pull outwards.

There should be a slow but steady flow of water which originates from the gravity drain

located in bottom of the Baja spa.

CABINET DRAIN INSTALLATION

Secure Nut

to Cabinet

Clamp to

Hose/Barb

Pull Out & Turn

Counter Clockwise

3/4” Clear Hose to Spa Gravity Drain

Attach coupling blocks to one end

of side panel with toggle bolts and

tool supplied with cabinet.

(PS 1042, WW 1067/ 68)

Align with another side panel.

Insert bolts and tighten securely.

Position side panels under spa

lip with black kickboard on the

bottom.

Install corner posts (pay attention to "up"

arrows) to side panels, then small panels to

each corner post around spa using panel

bolts and bolt driver.

Completed Baja spa.