Instruction Manual

Installation and Training Instructions (cont’d)
Warning! Shock Hazard! No User Serviceable Parts.
Do not attempt service of this control system. Contact your dealer or service organization
for assistance. Follow all owner’s manual power connection instructions. Installation must be
performed by a licensed electrician and all grounding connections must be properly installed.
40804_A, June 13, 2007
J6
J3
J2
J1
TEST
Balboa
MADE IN U.S.A. P/N 22039_ A
© 2006
J1
J2
BL
LT
HT
FC
OZ
Enter
Jets 2Jets 1
LightBlower
102
º
F
If you have a Spa Side Panel, insert the
cable into J3. Turn power back on to the
Spa. The system will recognize the Spa
Side Panel immediately.
If you have a Hand Held Panel, connect
the cable of the transceiver into J3. Turn
power back on to the Spa. Proceed to
step number 6.
Linking the Hand Held Panel to the System
The hand held panel must be added, or “linked”
before it will communicate with the system.
To Exit a Menu,
Arrow Left
Select
Arrow Left
Arrow Down
Arrow Up
Arrow Right
5
6
To Link the Panel to the Spa Control System
“Home” > Set >
> Link Panel > .
To link your wireless panel to the system, press
.
Follow the on-screen instructions:
Shut off power to spa.
Turn spa power back on and
then push select on this
panel within 30 seconds.
Additional screens will follow: “Linking Panel...Please
Wait”; then, “Panel Linked Successfully”. “Starting
Up” will also blink.
If the “Priming Mode” screen appears, follow the
instructions. You’ll probably choose “Exit Priming
Mode” if you’re simply creating a link from the
Wireless Panel to the Spa Control System. Once
completed, “Acquiring System Config.” will blink on
the “Home” display.
OR