Instructions / Assembly

FILLING THE POOL
WARNING: Never leave the pool empty as an empty pool can
collapse.
IMPORTANT: Before filling the pool, ensure all screws are tight
and that the filter system and EZlight have been fully installed.
1. Continue to fill the pool with water.
2. Prior to the water reaching the return and skimmer; follow the
manufacturer's instructions of installing the EZlight and Smart-
Clear filter system. Failure to do so may result in loss of water.
3. Ensure all fittings are tight to prevent water leakage.
4.
Fill the pool until the water is halfway up the skimmer box opening.
WATER CHEMISTRY
The following ranges are the recommended water levels to maintain
a properly balanced pool.
NOTE: Properly balanced water is a guideline for preserving
warranty coverage.
PH Level: 7.2 - 7.8
Total Alkalinity: 80 - 120 ppm
Calcium Hardness: 150 - 300 ppm
Cyanuric Acid: 0 - 50 ppm
Free Chlorine: 1 - 3 ppm
WINTERIZING
Geographical location is a key factor in how a pool should be
winterized. Consulting with a local pool professional on proper
winterization of an aboveground pool in your area is recommended.
The manufacturer cannot assume any responsibility for pool failure
which may result from winter conditions, misuse or neglect. The
follow are general winterizing instructions.
1. Remove all pool accessories that are attached or rest inside the
pool (ladders, floats, cleaners, etc).
2. Ensure the pool is clear of all debris by vacuuming and
skimming it thoroughly.
3. Follow instructions to winterize the filter system and any other
accessories that may be used in the pool (lights, alarms,
fountains, etc).
4. Drain the pool so that it is 3" below the return line of the pool.
5. Keep the skimmer box line open by removing the flex hose to
drain any water that may enter the skimmer box. Water that sits
and freezes in the skimmer box can damage the box or the pool
wall.
6. Add proper amounts of winterizing pool chemical to keep the
water clean over the winter months.
7. Cover the pool with a winter cover to keep debris out of the pool.
8. Remove any water or snow that may collect on the pool cover
when it is not in use.
9. Inspect the pool throughout the winter months to check for
leaks or movement of the pool or surround soil.
10. Do NOT walk on the pool cover or play around the pool during
the winter.
9