User Guide

> Picture and Sound
44
Press LIST until SOUND* is displayed
Press to display the current sound
The current sound is indicated in the
BeoCenter AV5 display
Press repeatedly to switch between
the different types of sound and
stop when you hear the desired
sound
*Note: In order to display SOUND on Beo4, you
must add the function to the Beo4 list of
functions, please refer to Beo4’s own User’s guide
and the chapter, Customizing your Beo4, for
further instruction.
Several types of sound may be
available for the TV (or Satellite*)
programme you are watching, for
example both Stereo and Mono sound,
or two or three different languages.
While you are watching a programme
you can switch between the types of
sound currently available. If you are
watching a multi-language TV
programme, you can switch from one
language to another.
The various types of sound, which are
available, will be displayed on the
BeoCenter AV5 display as you select
them.
*Note: For a Satellite station, you will be able to
switch between MONO, STEREO, MONO1,
STEREO1, MONO2, MONO3, STEREO2 and
STEREO3 sound types.
Note: You can store a specific type of sound for a
particular station, so, when you switch on to this
station, you will hear the sound or language, you
stored for it. Please refer to the manual tuning
procedure for both TV and Satellite for further
instruction, see pages 16-19.
These types of sound may not all be available on
any one TV station, you can choose to hear the
various types of sound currently transmitted.
Mono Language 3 and Stereo Language 2 are
only available if you are tuned in to a station
using the NICAM stereo system and your TV is
equipped with a NICAM stereo decoder.
Switching sound
MONO Mono sound (FM/NICAM)
STEREO Stereo sound (NICAM/A2)
MONO1 Mono language 1
MONO2 Mono language 2
MONO3 Mono language 3
STEREO2 Stereo language 2
LIST
GO
then
GO
then