User Guide

51
Note: If Satellite and V.Tape are available in your
link room system, inbuilt or connected to
BeoCenter AV5 respectively, and you want to
watch Satellite or V.Tape from a main room
system, you must press LIST repeatedly to find
LINK* in the Beo4 display first, and then press SAT
or V TAPE to watch these sources on your link
room system.
*Note: In order to be able to display LINK on
Beo4, you must add the function to the Beo4 LIST
of functions, please refer to Beo4’s own User’s
guide and the chapter, Customising your Beo4, for
further instruction.
Timer play or standby and link room
system…
It is not possible to make a Timer play or
standby on your link room BeoCenter AV5.
However, if you have made a Timer play or
standby on your main room system, remember
to switch on the Timer function on your
BeoCenter AV5 close-up operation panel, to
be able to execute the Timer on your link
room BeoCenter AV5. A Timer standby will be
executed on your link room BeoCenter AV5
whether or not the Timer function is on or
not.
To do so, press the PLAY TIMER button on the
BeoCenter AV5 close-up operation panel, PT
appears in the display when the function is
switched on.