User Guide Instruction Manual

System use with several handsets

With several handsets registered to one base, you can make your

own phone system. The handsets can all receive external calls, also

during internal calls between handsets. Handsets in the system are

numbered 1–8* and can be named as well.

Each handset is initially set up as ‘common’. This means that the

Phonebook, Caller ID list and Redial list are all updated by the base

and shared with other handsets in the system. If you want an

independent Phonebook, Caller ID list and Redial list in an

individual handset, make the handset ‘personal’ instead.

For further information about the possibilities a system setup offers,

please refer to the following pages.

*If you use a BeoCom 6000 base, a BeoLine PSTN base or a BeoLine ISDN

base, you can only register six handsets.