User Guide Owner's manual
24
Two TVs with Network Link in the same room (with one BeoRemoteOne)
>> BeoLink setup
To show/hide sources of both TVs using
BeoRemoteOne...
> Select BeoVision or BeoVision(2)*
1
in the
BeoRemoteOne LIST.
> Show
or hide sources*
2
of both
televisions via the BeoRemoteOne LIST,
see page 9.
> Show
or hide linked sources, such as
HDMI1 of both televisions via the
BeoRemoteOne LIST, see page 9.
Example of how to listen to a linked TV
source*
3
...
Press to bring up the current
product, such as BeoVision, in
the BeoRemoteOne LIST
Select the desired product, for
example, BeoVision(2)*
1
Press TV and select a
linked source, such as
HDMI 1
BeoVision
BeoVision(2)
LIST
BeoVision
BeoVision(2)
TV
HDMI 1
In this setup, one Network Link TV is
BeoVision per default and the other is set up
as BeoVision(2). For information about how
to set up your product, see page 13.
You have the same list of TV and MUSIC
sources for both products BeoVision and
BeoVision(2).
1
*In this example BeoVision(2) is already
added to the BeoRemoteOne LIST and the
TV is set up as BeoVision(2).
2
*Note that available TV sources are shown in
the SOURCE LIST menu of your television.
3
* With Network Link you can access sound
from sources of other products in the
network.
Note! If a Network Link product is intended
for operation with Beo4, you must set it up as
a ‘Beo4’ product instead. For more
information, see pages 16–18.
TV
YOUTUBE
HDMI 1
NET RADIO
SPOTIFY
RADIO
Access linked sources
from BeoVision(2)
Access
linked sources
from BeoVision
Default product: Product Option: